Code Quality

This is a printer-friendly version. It omits exercises, optional topics (i.e., four-star topics), and other extra content such as learning outcomes.

Introduction

Basic

Always code as if the person who ends up maintaining your code will be a violent psychopath who knows where you live. -- Martin Golding

Production code needs to be of high quality. Given how the world is becoming increasingly dependent of software, poor quality code is something we cannot afford to tolerate.

Production Code
Code being used in an actual product with actual users

Guideline: Maximise Readability

Introduction

Programs should be written and polished until they acquire publication quality. --Niklaus Wirth

Among various dimensions of code quality, such as run-time efficiency, security, and robustness, one of the most important is understandability. This is because in any non-trivial software project, code needs to be read, understood, and modified by other developers later on. Even if we do not intend to pass the code to someone else, code quality is still important because we all become 'strangers' to our own code someday.

The two code samples given below achieve the same functionality, but one is easier to read.

Bad

int subsidy() {
int subsidy;
if (!age) {
if (!sub) {
if (!notFullTime) {
subsidy = 500;
} else {
subsidy = 250;
}
} else {
subsidy = 250;
}
} else {
subsidy = -1;
}
return subsidy;
}
  

Good

int calculateSubsidy() {
int subsidy;
if (isSenior) {
subsidy = REJECT_SENIOR;
} else if (isAlreadySubsidised) {
subsidy = SUBSIDISED_SUBSIDY;
} else if (isPartTime) {
subsidy = FULLTIME_SUBSIDY * RATIO;
} else {
subsidy = FULLTIME_SUBSIDY;
}
return subsidy;
}

Bad

def calculate_subs():
if not age:
if not sub:
if not not_fulltime:
subsidy = 500
else:
subsidy = 250
else:
subsidy = 250
else:
subsidy = -1
return subsidy
  

Good

def calculate_subsidy():
if is_senior:
return REJECT_SENIOR
elif is_already_subsidised:
return SUBSIDISED_SUBSIDY
elif is_parttime:
return FULLTIME_SUBSIDY * RATIO
else:
return FULLTIME_SUBSIDY

Basic

Avoid Long Methods

Be wary when a method is longer than the computer screen, and take corrective action when it goes beyond 30 LOC (lines of code). The bigger the haystack, the harder it is to find a needle.

Avoid Deep Nesting

If you need more than 3 levels of indentation, you're screwed anyway, and should fix your program. --Linux 1.3.53 CodingStyle

In particular, avoid arrowhead style code.

A real code example:

Bad

int subsidy() {
int subsidy;
if (!age) {
if (!sub) {
if (!notFullTime) {
subsidy = 500;
} else {
subsidy = 250;
}
} else {
subsidy = 250;
}
} else {
subsidy = -1;
}
return subsidy;
}
  

Good

int calculateSubsidy() {
int subsidy;
if (isSenior) {
subsidy = REJECT_SENIOR;
} else if (isAlreadySubsidised) {
subsidy = SUBSIDISED_SUBSIDY;
} else if (isPartTime) {
subsidy = FULLTIME_SUBSIDY * RATIO;
} else {
subsidy = FULLTIME_SUBSIDY;
}
return subsidy;
}

Bad

def calculate_subs():
if not age:
if not sub:
if not not_fulltime:
subsidy = 500
else:
subsidy = 250
else:
subsidy = 250
else:
subsidy = -1
return subsidy
  

Good

def calculate_subsidy():
if is_senior:
return REJECT_SENIOR
elif is_already_subsidised:
return SUBSIDISED_SUBSIDY
elif is_parttime:
return FULLTIME_SUBSIDY * RATIO
else:
return FULLTIME_SUBSIDY

Avoid Complicated Expressions

Avoid complicated expressions, especially those having many negations and nested parentheses. If you must evaluate complicated expressions, have it done in steps (i.e. calculate some intermediate values first and use them to calculate the final value).

Example:

Bad

return ((length < MAX_LENGTH) || (previousSize != length)) && (typeCode == URGENT);

Good


boolean isWithinSizeLimit = length < MAX_LENGTH;
boolean isSameSize = previousSize != length;
boolean isValidCode = isWithinSizeLimit || isSameSize;

boolean isUrgent = typeCode == URGENT;

return isValidCode && isUrgent;

Example:

Bad

return ((length < MAX_LENGTH) or (previous_size != length)) and (type_code == URGENT)

Good

is_within_size_limit = length < MAX_LENGTH
is_same_size = previous_size != length
is_valid_code = is_within_size_limit or is_same_size

is_urgent = type_code == URGENT

return is_valid_code and is_urgent

The competent programmer is fully aware of the strictly limited size of his own skull; therefore he approaches the programming task in full humility, and among other things he avoids clever tricks like the plague. -- Edsger Dijkstra

Avoid Magic Numbers

When the code has a number that does not explain the meaning of the number, we call that a "magic number" (as in "the number appears as if by magic"). Using a e.g., PInamed constant makes the code easier to understand because the name tells us more about the meaning of the number.

Example:

Bad

return 3.14236;
...
return 9;
  

Good

static final double PI = 3.14236;
static final int MAX_SIZE = 10;
...
return PI;
...
return MAX_SIZE-1;

Note: Python does not have a way to make a variable a constant. However, you can use a normal variable with an ALL_CAPS name to simulate a constant.

Bad

return 3.14236
...
return 9
  

Good

PI = 3.14236
MAX_SIZE = 10
...
return PI
...
return MAX_SIZE-1

Similarly, we can have ‘magic’ values of other data types.

Bad

"Error 1432"  // A magic string!

In general, try to avoid any magic literals.

Make the Code Obvious

Make the code as explicit as possible, even if the language syntax allows them to be implicit. Here are some examples:

  • [Java] Use explicit type conversion instead of implicit type conversion.
  • [Java, Python] Use parentheses/braces to show grouping even when they can be skipped.
  • [Java, Python] Use enumerations when a certain variable can take only a small number of finite values. For example, instead of declaring the variable 'state' as an integer and using values 0,1,2 to denote the states 'starting', 'enabled', and 'disabled' respectively, declare 'state' as type SystemState and define an enumeration SystemState that has values 'STARTING', 'ENABLED', and 'DISABLED'.

Intermediate

Structure Code Logically

Lay out the code so that it adheres to the logical structure. The code should read like a story. Just like we use section breaks, chapters and paragraphs to organize a story, use classes, methods, indentation and line spacing in your code to group related segments of the code. For example, you can use blank lines to group related statements together. Sometimes, the correctness of your code does not depend on the order in which you perform certain intermediary steps. Nevertheless, this order may affect the clarity of the story you are trying to tell. Choose the order that makes the story most readable.

Do Not 'Trip Up' Reader

Avoid things that would make the reader go ‘huh?’, such as,

  • unused parameters in the method signature
  • similar things that look different
  • different things that look similar
  • multiple statements in the same line
  • data flow anomalies such as, pre-assigning values to variables and modifying it without any use of the pre-assigned value

Practice KISSing

As the old adage goes, "keep it simple, stupid” (KISS). Do not try to write ‘clever’ code. For example, do not dismiss the brute-force yet simple solution in favor of a complicated one because of some ‘supposed benefits’ such as 'better reusability' unless you have a strong justification.

Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it. --Brian W. Kernighan

Programs must be written for people to read, and only incidentally for machines to execute. --Abelson and Sussman

Avoid Premature Optimizations

Optimizing code prematurely has several drawbacks:

  • We may not know which parts are the real performance bottlenecks. This is especially the case when the code undergoes transformations (e.g. compiling, minifying, transpiling, etc.) before it becomes an executable. Ideally, you should use a profiler tool to identify the actual bottlenecks of the code first, and optimize only those parts.
  • Optimizing can complicate the code, affecting correctness and understandability
  • Hand-optimized code can be harder for the compiler to optimize (the simpler the code, the easier for the compiler to optimize it). In many cases a compiler can do a better job of optimizing the runtime code if you don't get in the way by trying to hand-optimize the source code.

A popular saying in the industry is make it work, make it right, make it fast which means in most cases getting the code to perform correctly should take priority over optimizing it. If the code doesn't work correctly, it has no value on matter how fast/efficient it it.

Premature optimization is the root of all evil in programming. --Donald Knuth

Note that there are cases where optimizing takes priority over other things e.g. when writing code for resource-constrained environments. This guideline simply a caution that you should optimize only when it is really needed.

SLAP Hard

Avoid varying the level of abstraction within a code fragment. Note: The Productive Programmer (by Neal Ford) calls this the SLAP principle i.e. Single Level of Abstraction Per method.

Example:

Bad (readData(); and salary = basic*rise+1000; are at different levels of abstraction)

readData();
salary = basic*rise+1000;
tax = (taxable?salary*0.07:0);
displayResult();

Good (all statements are at the same level of abstraction)

readData();
processData();
displayResult();

Design → Design Fundamentals → Abstraction →

What

Abstraction is a technique for dealing with complexity. It works by establishing a level of complexity we are interested in, and suppressing the more complex details below that level.

The guiding principle of abstraction is that only details that are relevant to the current perspective or the task at hand needs to be considered. As most programs are written to solve complex problems involving large amounts of intricate details, it is impossible to deal with all these details at the same time. That is where abstraction can help.

Data abstraction: abstracting away the lower level data items and thinking in terms of bigger entities

Within a certain software component, we might deal with a user data type, while ignoring the details contained in the user data item such as name, and date of birth. These details have been ‘abstracted away’ as they do not affect the task of that software component.

Control abstraction: abstracting away details of the actual control flow to focus on tasks at a higher level

print(“Hello”) is an abstraction of the actual output mechanism within the computer.

Abstraction can be applied repeatedly to obtain progressively higher levels of abstractions.

An example of different levels of data abstraction: a File is a data item that is at a higher level than an array and an array is at a higher level than a bit.

An example of different levels of control abstraction: execute(Game) is at a higher level than print(Char) which is at a higher than an Assembly language instruction MOV.

Abstraction is a general concept that is not limited to just data or control abstractions.

Some more general examples of abstraction:

  • An OOP class is an abstraction over related data and behaviors.
  • An architecture is a higher-level abstraction of the design of a software.
  • Models (e.g., UML models) are abstractions of some aspect of reality.

Advanced

Make the Happy Path Prominent

The happy path (i.e. the execution path taken when everything goes well) should be clear and prominent in your code. Restructure the code to make the happy path unindented as much as possible. It is the ‘unusual’ cases that should be indented. Someone reading the code should not get distracted by alternative paths taken when error conditions happen. One technique that could help in this regard is the use of guard clauses.

Example:

Bad

if (!isUnusualCase) {  //detecting an unusual condition
if (!isErrorCase) {
start(); //main path
process();
cleanup();
exit();
} else {
handleError();
}
} else {
handleUnusualCase(); //handling that unusual condition
}

In the code above,

  • Unusual condition detection is separated from their handling.
  • Main path is nested deeply.

Good

if (isUnusualCase) { //Guard Clause
handleUnusualCase();
return;
}

if (isErrorCase) { //Guard Clause
handleError();
return;
}

start();
process();
cleanup();
exit();

In contrast, the above code

  • deals with unusual conditions as soon as they are detected so that the reader doesn't have to remember them for long.
  • keeps the main path un-indented.

Guideline: Follow a Standard

Introduction

One essential way to improve code quality is to follow a consistent style. That is why software engineers follow a strict coding standard (aka style guide).

The aim of a coding standard is to make the entire code base look like it was written by one person. A coding standard is usually specific to a programming language and specifies guidelines such as the location of opening and closing braces, indentation styles and naming styles (e.g. whether to use Hungarian style, Pascal casing, Camel casing, etc.). It is important that the whole team/company use the same coding standard and that standard is not generally inconsistent with typical industry practices. If a company's coding standards is very different from what is used typically in the industry, new recruits will take longer to get used to the company's coding style.

IDEs can help to enforce some parts of a coding standard e.g. indentation rules.

Basic

Learn the Java coding standard specified by your instructor.

Guideline: Name Well

Introduction

Proper naming improves the readability. It also reduces bugs caused by ambiguities regarding the intent of a variable or a method.

There are only two hard things in Computer Science: cache invalidation and naming things. -- Phil Karlton

Basic

Use Nouns for Things and Verbs for Actions

Every system is built from a domain-specific language designed by the programmers to describe that system. Functions are the verbs of that language, and classes are the nouns. ― Robert C. Martin, Clean Code: A Handbook of Agile Software Craftsmanship

Use nouns for classes/variables and verbs for methods/functions.

Examples:

Name for a Bad Good
Class CheckLimit LimitChecker
method result() calculate()

Distinguish clearly between single-valued and multivalued variables.

Examples:

Good

Person student;
ArrayList<Person> students;

Good

name = 'Jim'
names = ['Jim', 'Alice']

Use Standard Words

Use correct spelling in names. Avoid 'texting-style' spelling. Avoid foreign language words, slang, and names that are only meaningful within specific contexts/times e.g. terms from private jokes, a TV show currently popular in your country

Intermediate

Use Name to Explain

A name is not just for differentiation; it should explain the named entity to the reader accurately and at a sufficient level of detail.

Examples:

Bad Good
processInput() (what 'process'?) removeWhiteSpaceFromInput()
flag isValidInput
temp

If the name has multiple words, they should be in a sensible order.

Examples:

Bad Good
bySizeOrder() orderBySize()

Imagine going to the doctor's and saying "My eye1 is swollen"! Don’t use numbers or case to distinguish names.

Examples:

Bad Bad Good
value1, value2 value, Value originalValue, finalValue

Not Too Long, Not Too Short

While it is preferable not to have lengthy names, names that are 'too short' are even worse. If you must abbreviate or use acronyms, do it consistently. Explain their full meaning at an obvious location.

Avoid Misleading Names

Related things should be named similarly, while unrelated things should NOT.

Example: Consider these variables

  • colorBlack: hex value for color black
  • colorWhite: hex value for color white
  • colorBlue: number of times blue is used
  • hexForRed: hex value for color red

This is misleading because colorBlue is named similar to colorWhite and colorBlack but has a different purpose while hexForRed is named differently but has very similar purpose to the first two variables. The following is better:

  • hexForBlack hexForWhite hexForRed
  • blueColorCount

Avoid misleading or ambiguous names (e.g. those with multiple meanings), similar sounding names, hard-to-pronounce ones (e.g. avoid ambiguities like "is that a lowercase L, capital I or number 1?", or "is that number 0 or letter O?"), almost similar names.

Examples:

Bad Good Reason
phase0 phaseZero Is that zero or letter O?
rwrLgtDirn rowerLegitDirection Hard to pronounce
right left wrong rightDirection leftDirection wrongResponse right is for 'correct' or 'opposite of 'left'?
redBooks readBooks redColorBooks booksRead red and read (past tense) sounds the same
FiletMignon egg If the requirement is just a name of a food, egg is a much easier to type/say choice than FiletMignon

Guideline: Avoid Unsafe Shortcuts

Introduction

It is safer to use language constructs in the way they are meant to be used, even if the language allows shortcuts. Some such coding practices are common sources of bugs. Know them and avoid them.

Basic

Use the Default Branch

Always include a default branch in case statements.

Furthermore, use it for the intended default action and not just to execute the last option. If there is no default action, you can use the 'default' branch to detect errors (i.e. if execution reached the default branch, throw an exception). This also applies to the final else of an if-else construct. That is, the final else should mean 'everything else', and not the final option. Do not use else when an if condition can be explicitly specified, unless there is absolutely no other possibility.

Bad

if (red) print "red";
else print "blue";

Good

if (red) print "red";
else if (blue) print "blue";
else error("incorrect input");

Don't Recycle Variables or Parameters

  • Use one variable for one purpose. Do not reuse a variable for a different purpose other than its intended one, just because the data type is the same.
  • Do not reuse formal parameters as local variables inside the method.

Bad

double computeRectangleArea(double length, double width) {
length = length * width;
return length;
}

Good

double computeRectangleArea(double length, double width) {
double area;
area = length * width;
return area;
}

Avoid Empty Catch Blocks

Never write an empty catch statement. At least give a comment to explain why the catch block is left empty.

Delete Dead Code

We all feel reluctant to delete code we have painstakingly written, even if we have no use for that code any more ("I spent a lot of time writing that code; what if we need it again?"). Consider all code as baggage you have to carry; get rid of unused code the moment it becomes redundant. If you need that code again, simply recover it from the revision control tool you are using. Deleting code you wrote previously is a sign that you are improving.

Intermediate

Minimize Scope of Variables

Minimize global variables. Global variables may be the most convenient way to pass information around, but they do create implicit links between code segments that use the global variable. Avoid them as much as possible.

Define variables in the least possible scope. For example, if the variable is used only within the if block of the conditional statement, it should be declared inside that if block.

The most powerful technique for minimizing the scope of a local variable is to declare it where it is first used. -- Effective Java, by Joshua Bloch

Resources:

Minimize Code Duplication

Code duplication, especially when you copy-paste-modify code, often indicates a poor quality implementation. While it may not be possible to have zero duplication, always think twice before duplicating code; most often there is a better alternative.

This guideline is closely related to the DRY Principle.

Principles →

DRY Principle

DRY (Don't Repeat Yourself) Principle: Every piece of knowledge must have a single, unambiguous, authoritative representation within a system The Pragmatic Programmer, by Andy Hunt and Dave Thomas

This principle guards against duplication of information.

The functionality implemented twice is a violation of the DRY principle even if the two implementations are different.

The value a system-wide timeout being defined in multiple places is a violation of DRY.

Guideline: Comment Minimally, but Sufficiently

Introduction

Good code is its own best documentation. As you’re about to add a comment, ask yourself, ‘How can I improve the code so that this comment isn’t needed?’ Improve the code and then document it to make it even clearer. --Steve McConnell, Author of Clean Code

Some think commenting heavily increases the 'code quality'. This is not so. Avoid writing comments to explain bad code. Improve the code to make it self-explanatory.

Basic

Do Not Repeat the Obvious

If the code is self-explanatory, refrain from repeating the description in a comment just for the sake of 'good documentation'.

Bad

// increment x
x++;

//trim the input
trimInput();

Bad

// increment x
x = x + 1

//trim the input
trim_input()

Write to the Reader

Do not write comments as if they are private notes to yourself. Instead, write them well enough to be understood by another programmer. One type of comments that is almost always useful is the header comment that you write for a class or an operation to explain its purpose.

Examples:

Bad Reason: this comment will only make sense to the person who wrote it

// a quick trim function used to fix bug I detected overnight
void trimInput(){
....
}

Good

/** Trims the input of leading and trailing spaces */
void trimInput(){
....
}

Bad Reason: this comment will only make sense to the person who wrote it

# a quick trim function used to fix bug I detected overnight
def trim_input():
...

Good

def trim_input():
"""Trim the input of leading and trailing spaces"""
...

Intermediate

Explain WHAT and WHY, not HOW

Comments should explain what and why aspect of the code, rather than the how aspect.

What : The specification of what the code supposed to do. The reader can compare such comments to the implementation to verify if the implementation is correct

Example: This method is possibly buggy because the implementation does not seem to match the comment. In this case the comment could help the reader to detect the bug.

/** Removes all spaces from the {@code input} */
void compact(String input){
input.trim();
}

Why : The rationale for the current implementation.

Example: Without this comment, the reader will not know the reason for calling this method.

// Remove spaces to comply with IE23.5 formatting rules
compact(input);

How : The explanation for how the code works. This should already be apparent from the code, if the code is self-explanatory. Adding comments to explain the same thing is redundant.

Example:

Bad Reason: Comment explains how the code works.

// return true if both left end and right end are correct or the size has not incremented
return (left && right) || (input.size() == size);

Good Reason: Code refactored to be self-explanatory. Comment no longer needed.


boolean isSameSize = (input.size() == size) ;
return (isLeftEndCorrect && isRightEndCorrect) || isSameSize;